Brief Descripton:
Fast setting
Polymer added for extra flexibility
External/permanently wet areas - swimming pools etc
Conforms to BSEN 13888 CG2
3mm to 20mm joints.
Detailed Description:
Polymer modified flexible grout suitable for joints between tiles up to 20mm.
When cured it is water resistant and suitable for internal and external use.
Suitable for use in kitchens and bathrooms.
Suitable for use in wet areas including swimming pools and showers.
Suitable for both Wall and Floor tiles
Suitable for grouting a variety of tiles such as ceramics, slate,quarries, porcelain, limestone, marble, terrazzo, and mosaics subject to slight movement or vibration on a variety of surfaces.
WARNING:
Coloured grouts can cause staining to certain tiles.Apply a suitable tile protector.
Avoid covering tiles with grout and work into the joints contacting as little of the tile as possible.
You are advised to check the grout on a spare tile before grouting commences.
Minimum joint width 2mm.
Can cause scratching to soft glazed or vulnerable wall tiles.
PREPARATION:
Ensure tiles are firmly fixed before grouting. Joints must be clean.
UNDERFLOOR HEATING:
Suitable for under floor heating. Allow 48 hours for the grout to set before introducing heat gradually.
TILE GROUTING:
Add grout powder to clean cold tap water in a clean container and mix to a smooth slightly stiff consistency either by hand or using a mechanical mixing paddle.
Addition rate 4 parts by weight of powder to 1 part water.
Do not use excess water during mixing or washing down as this can lead to staining or efflorescence on the surface of the grout. Mix only sufficient that can be used within 30 minutes.
Product that has started to set must be discarded.Work the grout into the joints to ensure they are completely filled. Clean surplus grout from the tiles and joints as soon as possible as set grout will be difficult to remove later. Polish the surface with a soft dry cloth.
FLOOR MAINTENANCE:
PACK SIZES: 10Kg
COLOUR: Limestone
STORAGE: Store unopened in cool dry conditions.
Keep clear of the ground.
SHELF LIFE: Stored correctly, this product has a shelf life of 12 months from the date shown on the packaging.
TECHNICAL DATA:
Suitable for under floor heating: Yes
Bulk density of powder: 1.2Kg per Litre
Weight of wet mortar: 1.6Kg per Litre
Joint Sizes: Up to 20mm
*Note: All times refer to site conditions of 20ºC.These times will be increased
at lower temperatures and reduced at elevated temperatures.
Application temperature: Between 5ºC and 30ºC
Service Conditions: -20ºC to +50ºC
Pot Life: 30 mins at 20ºC
Setting Time: 24 hours*
Light Foot Traffic: 3 hours*
